What you will do :
- Control and supervise all PLC/Controls related Operations & Maintenance activities in all Siemens Logistics Customer Service sites assuring overall target of system availability as well as all other contractual KPIs.
- Proactively ensure the maintenance of the system is done technically with close coordination of the field team to reduce/negate issues that may contribute to operational impact.
- Comply with any QHSE standard of both Client and Siemens internally.
- Troubleshooting all PLC/Controls related issues in all Customer Service sites, including logic, communication, and hardware about the PLC system.
- Drive minor/major modification of the system w.r.t. high and low-level electrical controls, including hardware and software. E.g., PLC, drives, HMIs, etc. (2nd and 3rd level (PLC backup).
- Suggest and implement PLC/Controls improvements.
- Prepare technical reports related to System Improvements, Incidents (RCA), and liaise with the Client.
- Control and monitor material flow within the system SCADA.
- Perform analysis on issues raised by the operations team and suggest adequate solutions to resolve the problem permanently.
- Review, provide input & manage project documentation throughout the project life cycle, including all correspondences, submittal, drawings, method statements, inspection documentation, O&M manuals, etc. And ensure a safe archive of project data at all times.
- Acting as the technical adviser, providing guidance and advice to the installation & commissioning team, subcontractors, and operatives. Resolving any unexpected technical difficulties and other problems that may arise.
- Should be able to generate variations and new requirements at the project site and coordinate with the sales/presales department to submit proposals.
Required skills to be successful :
- Excellent problem solving skills & Interpersonal skills
- Client relationship management
- Detail oriented & strong analytical skills
What equips you for the role :
- Bachelor's Degree specializing in Instrumentation, Electromechanical, Electrical, or Electronic Engineering
- Minimum 5 years of Automation experience
- Minimum 3 years of experience in Project development and commissioning involving Allen-Bradley PLC & SCADA System, Siemens PLCs (Simatic Manager-Step7, TIA), HMIs (WinCC Flexible), Drives (Sinamics, Micromaster, SEW, Danfoss), and SCADA (WinCC).
- Good commissioning and service knowledge in BMS (Johnson Controls – Facility Explorer) system
- Strong PLC diagnostic and programming experience - fault finding and programming knowledge are essential, including electrical & electronic fault finding, electromechanical installations, and electrical installations, and PLC programming and modification.