أدخل المسمى الوظيفي أو الكلمة الرئيسية
QC Inspector (Piping, Welding & NDE)
موقع الوظيفة:
الراتب شهرياً:
تم النشر:
18 يوليو 2026 (نُشرت قبل 20 يوم)
تم النشر:
آخر موعد للتقديم:
16 اكتوبر 2026
آخر موعد للتقديم:
عدد الوظائف الشاغرة:
1 عدد الوظائف الشاغرة
عدد الوظائف الشاغرة:
ملخص الوظيفة
ESSENTIAL QUALIFICATIONS AND SKILLS:
KEY RESPONSIBILITIES:
Welding:
- Diploma in Mechanical Engineering or equivalent.
- CSWP 3.1 or AWS CWI for Welding and NDT Level II Certifications for NDE.
- CSWIP film interpretation/CSWIP 3.2.2/ RTFI Level II Certification through Petrofac for RT interpretation.
- Minimum 7 years experience as Welding/Piping/Pipeline QC Inspector & Painting/coating/Refractory/Fireproofing QC Inspector.
- Should have experience in oil & gas/petrochemical industry
- Should have previously worked with major EPC contractor or their subcontractors
KEY RESPONSIBILITIES:
Welding:
- Monitoring and reporting fabrication installation erection and testing processes of process piping steel structures tanks vessels and metallic items.
- Review of WPS PQR and weld maps.
- Witness Welder Qualifications. Ensure that material/welding consumables are stored and handled correctly when required material traceability is maintained and correct material used.
- Ensure a system of welding consumable control is implemented.
- Ensure welding machines/baking ovens/quivers are in serviceable condition and where required is within the valid calibration period.
- Timely inspection during fabrication and construction.
- Check for the qualification of the welding personnel and the kind of materials being used for the process.
- Carry out inspection of work in progress including checking if the right procedure is followed for the welding process.
- Perform visual and dimensional checks.
- Monitor welding process parameters for compliance with approved procedures and project specifications.
- Perform in process (before/during/after) and final visual inspections.
- Prepare/Review Inspection reports(Fit-up Final Visual).
- Monitor performance of contractors ensure personnel are qualified and competent to perform allocated tasks have valid certification where required for the welding techniques in use.
- Review test reports including PWHT chart/records for process output compliance with requirements.
- Prepare/review daily welding reports.
- Ensure that all non-destructive testing is performed in accordance with approved procedures by qualified and certified personnel.
- Verify validity of NDE Technicians certification for NDE method to be employed.
- Verify calibration status suitability and serviceability of equipment and consumables to be used.
- Coordinate NDE activities between subcontractor contractor and within Petrofac.
- Monitor supervise and assist NDE subcontractors to achieve quality standards.
- Witness performance of non-destructive testing and verify compliance with approved procedure.
- Interpret NDE results for acceptability to specification and code requirements.
- Review NDE reports and radiographs for compliance with procedure and code.
- Ensure ambient conditions are acceptable for required process output including darkroom facilities.
- Ensure that materials films chemicals etc. are stored and handled correctly.
- Review NDE procedures for suitability compliance to specifications and code requirements.
- Maintain status of NDE performed accepted/rejected and outstanding.
- Assist in the coordination of NDE activities
- Monitor and report compliance with P & IDs Isometric drawings codes standards and procedures all fabrication installation erection and testing processes of process piping.
- Ensure piping installation and test procedure(s) are followed.
- Ensure installation of piping is in compliance with isometric drawings and code requirements with respect to; material alignment supports valve type valve orientation heat trace insulation marking tapings take offs.
- Verify proper size and schedule of pipe rating of flange face and fittings.
- Ensure satisfactory identification of materials proper protection of piping and fittings.
- Ensure adequate valve access for operability and maintenance.
- Ensure operation of flange management system to include correct flange class flange type alignment gasket orifice plate bolts washers nuts bolt torque use of insulation kit.
- Responsible for quality control & inspection of piping fabrication activities.
- Line checking and clearing the punch items before the pressure test on completed pipelines.
- Checking the piping materials as per codes and process standard specifications. Inspection of shop fabrication of piping spools and supports.
- Visual inspection of plant piping and preparing Punch list after installation.
- Perform inspection on erection and installation of prefabricated pipe lines. Checking of Material take off list. Review pressure test packages as per P&ID Isometric drawings test limit drawings and all related documents and witnessing pressure/leak testing.
- Line check prior to pressure test ensuring provision of additional supports when required spring hangers are locked instruments orifice plates and equipment are isolated or removed blind flanges are correctly rated and certified valves removed or isolated vent and drain valves installed.
- Prepare punch list prior to pressure test categorize items ensure all A-items cleared prior to pressure test.
- Witness pressure test ensure gauges and recorders are within valid calibration inhibitors in use as required by specification line flushed vented and filled. Monitor pressure and sign off records.
- Prepare final punch list of outstanding actions/items categorize and monitor clearance.
- Inspect line reinstatement drain dry and preservation and sign off records.
المهارات المطلوبة
- تكنولوجيا المعلومات
- الإدارة والتشغيل
- الخدمات المالية
- مبيعات الأجهزة
- إدارة المرافق والمنشآت
- الحوسبة
