Rigging & Lifting Specialist

Min. Qualifications & Experience

• A bachelors degree in relevant engineering or equivalent from an accredited university with a minimum of fifteen (15) years of relevant experience in the Oil & Gas or Petrochemical industry
• Must have at least five (5) years of experience in similar position in a mega Oil & Gas or Petrochemical projects.
• ADNOC project experience is required
• Offshore project experience is required
• PMC experiences is required
• Experience in FEED & EPC Phases is required.
• Candidate should have done Crane assembly disassembly and actual heavy lifting installation.
• Must be an engineer first prior to being a lift superintendent or lift supervisor.
• Should be able to work with AutoCAD to do how own quick lift sketches and checks. Visualize and Develop lift studies and methodologies.
• Able to do and visualize preliminary lift rigging and tackle arrangement. Must be able to do preliminary tackle calculation to acquire preliminary capacities of slings required.

Experience

• Minimum 1015 years of relevant experience in lifting rigging heavy lifting construction or installation activities within the Oil & Gas Petrochemical Refinery Offshore or major industrial construction sector.
• Significant experience in PMC/EPC projects involving major lifting and equipment erection activities.
• Previous experience on ADNOC or similar major Middle East Oil & Gas projects is highly preferred.
• Strong practical experience with mobile cranes crawler cranes tower cranes gantry systems strand jacks and other heavy-lifting systems as applicable.
• Experience in both onshore and/or offshore lifting operations will be an advantage.
• Demonstrated experience reviewing and approving complex and critical lifting studies.

Technical Competencies

The candidate shall have strong knowledge of:

• Crane load charts and crane configuration.
• Rigging calculations and sling tension calculations.
• Centre of Gravity (COG) determination.
• Load distribution and lifting point calculations.
• Ground Bearing Pressure (GBP) and outrigger loading.
• Crane stability and lifting radius requirements.
• Heavy and critical lifting methodologies.
• Tandem and multiple-crane lifting operations.
• Lifting beams spreader beams shackles slings and rigging accessories.
• Lifting equipment inspection and certification requirements.
• Dropped Object Prevention requirements.
• SIMOPS and lifting-related risk management.
• PTW JSA/TRA toolbox talks and HSE management systems.
• Relevant standards and recommended practices such as BS 7121 LOLER PUWER ASME B30 series ISO standards and applicable ADNOC requirements.
  

Moving forward together

We want our people to be energized and empowered to drive sustainable impact. So our focus is on a values-inspired culture that unlocks brilliance through belonging connection and innovation. Were building a diverse inclusive and respectful workplace. Creating a space where everyone feels they belong can be themselves and are heard.

And were not just talking about it; were doing it. Were reskilling our people leveraging transferable skills and supporting the transition of our workforce to become experts in todays low carbon energy infrastructure and technology. Whatever your ambition theres a path for you here.

And theres no barrier to your potential career success. Join us to broaden your horizons explore diverse opportunities and be part of delivering sustainable change.

About us

Worley is a global company of energy chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting engineering procurement and construction across the project lifecycle with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery we support customers in navigating complexity as they meet todays needs and transition to more sustainable solutions.

Job Purpose

The Rigging & Lifting Specialist shall be responsible for the planning review coordination supervision and assurance of all lifting and rigging activities associated with the project. The role ensures that lifting operations are executed safely and efficiently and in compliance with ADNOC requirements applicable UAE regulations project specifications approved lifting procedures and international standards.
The Specialist shall provide technical expertise for routine non-routine critical and heavy lifting operations and shall ensure that lifting equipment lifting accessories personnel competency and lifting plans meet project and HSE requirements.

Key Responsibilities

• Review assess and approve lifting plans rigging studies method statements risk assessments/JSA and lifting procedures submitted by EPC Contractors and subcontractors.
• Provide specialist technical input for critical lifts heavy lifts tandem lifts engineered lifts and complex lifting operations.
• Review crane selection configuration capacity load charts lifting radius boom length counterweight arrangements ground bearing pressure outrigger loads and crane positioning.
• Verify calculations relating to load weight centre of gravity (COG) sling angles sling tensions lifting points spreader beams shackles lifting beams and other rigging arrangements.
• Review engineered lifting studies and ensure adequate safety factors are incorporated in accordance with applicable standards and project requirements.
• Ensure lifting operations comply with ADNOC Codes of Practice project HSE requirements approved procedures UAE regulations and applicable international standards.
• Review and verify certification and inspection status of cranes lifting appliances lifting accessories rigging gear and other lifting equipment.
• Ensure cranes and lifting equipment have valid third-party inspection certificates and are suitable for the intended lifting operation.
• Verify competency certification and authorization of Crane Operators Riggers Banksmen/Signalmen Lifting Supervisors Appointed Persons and other lifting personnel.
• Participate in pre-lift meetings toolbox talks constructability reviews SIMOPS reviews and Job Safety Analysis sessions for critical lifting activities.
• Conduct site inspections and audits of lifting and rigging activities and identify unsafe conditions non-compliances or deviations from approved lifting plans.
• Ensure proper establishment and control of lifting zones exclusion zones crane access ground preparation outrigger arrangements and lifting paths.
• Monitor lifting operations involving major equipment such as pressure vessels columns tanks modules structural steel piping assemblies rotating equipment transformers and packaged equipment.
• Provide technical support during equipment erection module installation shutdown/turnaround activities and major construction lifting operations.
• Review lifting requirements during the engineering and construction planning stages and identify potential lifting constraints at an early stage.
• Coordinate with Construction HSE Engineering Structural Mechanical Logistics Marine and Project Controls teams regarding lifting activities.
• Review Contractor lifting equipment registers and ensure inspection certification colour coding maintenance and traceability requirements are maintained.
• Ensure lifting accessories including wire ropes slings shackles hooks chain blocks lever hoists spreader beams and lifting beams are inspected and properly maintained.
• Monitor compliance with the projects Lifting Equipment Management System (LEMS) or equivalent lifting management procedure.
• Participate in investigations of lifting-related incidents near misses dropped-object events and equipment failures and recommend corrective/preventive actions.
• Provide technical guidance and mentoring to lifting supervisors rigging teams and construction personnel.
• Support project management in resolving technical and HSE issues related to lifting operations.
• Maintain records of lifting plan reviews inspections audits observations certifications and corrective actions.
• Ensure lessons learned and lifting-related best practices are communicated and implemented across the project.