Structural Engineer

الشارقة - الإمارات

الراتب شهرياً: لم يكشف

تاريخ النشر: 13-10-2025

عدد الوظائف الشاغرة: 1 عدد الوظائف الشاغرة

سجل للتقديم

ملخص الوظيفة

1.0 Scope of Responsibilities
Carry out design and calculation activities for the project as outlined below carrying out MTO estimates procurement support activities fabrication and construction requirements in compliance with project specifications budgeted manhours and schedules.
2.0Job Responsibilities

Design and Analysis: Develop and check detailed structural designs calculations and drawings for various components of offshore platforms including topsides jackets Bridge and Flare structures. Utilize software tools such as SACS or similar for structural analysis considering environmental loads Thermal seismic factors and dynamic effects.
Pre-Service Analysis Perform and check Lifting Transportation Loadout On-bottom analysis Upending.
In-Service Analysis Perform and check Global In-place Fatigue Seismic Pushover Boat landing design and impact analysis Bridge Jacking analysis CP Design & WCR.
Miscellaneous Design Joints/Node stabbing guide Equipment support PSI preparation VIV check wave slamming check grout check etc.
Collaboration:Workclosely with multidisciplinary teams to ensure structural designs are aligned with project requirements safety standards and client expectations.
Compliance and Standards: Interpret and apply project specifications client requirements and relevant codes and standards (e.g. API RP 2A AISC Eurocodes) to ensure compliance throughout the design and execution phases.
Participate in 3D Model review design reviews constructability/Installation workshops and interdisciplinary meetings to coordinate structural design activities with other engineering disciplines and stakeholders.
Documentation: Prepare technical specifications reports and documentation related to structural materials construction methods and quality assurance
Determine methods and solutions for engineering problems in tandem with the technical specialist and select the most efficient and economical manners in meeting objectives.
Supervise and provide guidance in the development of plot plans engineering drawings and technical documents issued for IDCs and the integration of other engineering discipline data inputs. Supervise the review of design calculations.
Prepares BOQ in the COMPANY provided format Direct and monitor Material Take off (MTO) activities.
Review and support Fabrication and Construction/Installation teams as required.
Administer the preparation of Purchase Requisitions for the procurement of Structural items.
Review and ensure Project structural design basis specifications calculation methods are aligned with Clients requirements.

3.0 Minimum Requirement

Offshore Structural Engineer with 8 to 15 years experience preferably from Consultancy or EPC organizations
EPC Experience in ADNOC Offshore Jobs for Jacket/Topside/Bridges/Flare Tower Design - Compulsory
Hands-on experience in performing Jacket/Topside/Bridge/Flare In-service & pre-service Analyses.
Experience in Fatigue Analysis (Spectral/Transportation/Wind) of Jacket & Flare/Bridge structure is preferred.
Familiar with SACS minimum 05 years of working experience with the software.
Knowledge in AGES/API/AISC Codes - Compulsory.
Conversant with DNV ISO DIN standards
Knowledge and experience about PSI file preparation and analysis.

1.0 Scope of ResponsibilitiesCarry out design and calculation activities for the project as outlined below carrying out MTO estimates procurement support activities fabrication and construction requirements in compliance with project specifications budgeted manhours and schedules.2.0Job Responsibili...

Design and Analysis: Develop and check detailed structural designs calculations and drawings for various components of offshore platforms including topsides jackets Bridge and Flare structures. Utilize software tools such as SACS or similar for structural analysis considering environmental loads Thermal seismic factors and dynamic effects.
Pre-Service Analysis Perform and check Lifting Transportation Loadout On-bottom analysis Upending.
In-Service Analysis Perform and check Global In-place Fatigue Seismic Pushover Boat landing design and impact analysis Bridge Jacking analysis CP Design & WCR.
Miscellaneous Design Joints/Node stabbing guide Equipment support PSI preparation VIV check wave slamming check grout check etc.
Collaboration:Workclosely with multidisciplinary teams to ensure structural designs are aligned with project requirements safety standards and client expectations.
Compliance and Standards: Interpret and apply project specifications client requirements and relevant codes and standards (e.g. API RP 2A AISC Eurocodes) to ensure compliance throughout the design and execution phases.
Participate in 3D Model review design reviews constructability/Installation workshops and interdisciplinary meetings to coordinate structural design activities with other engineering disciplines and stakeholders.
Documentation: Prepare technical specifications reports and documentation related to structural materials construction methods and quality assurance
Determine methods and solutions for engineering problems in tandem with the technical specialist and select the most efficient and economical manners in meeting objectives.
Supervise and provide guidance in the development of plot plans engineering drawings and technical documents issued for IDCs and the integration of other engineering discipline data inputs. Supervise the review of design calculations.
Prepares BOQ in the COMPANY provided format Direct and monitor Material Take off (MTO) activities.
Review and support Fabrication and Construction/Installation teams as required.
Administer the preparation of Purchase Requisitions for the procurement of Structural items.
Review and ensure Project structural design basis specifications calculation methods are aligned with Clients requirements.

3.0 Minimum Requirement

Offshore Structural Engineer with 8 to 15 years experience preferably from Consultancy or EPC organizations
EPC Experience in ADNOC Offshore Jobs for Jacket/Topside/Bridges/Flare Tower Design - Compulsory
Hands-on experience in performing Jacket/Topside/Bridge/Flare In-service & pre-service Analyses.
Experience in Fatigue Analysis (Spectral/Transportation/Wind) of Jacket & Flare/Bridge structure is preferred.
Familiar with SACS minimum 05 years of working experience with the software.
Knowledge in AGES/API/AISC Codes - Compulsory.
Conversant with DNV ISO DIN standards
Knowledge and experience about PSI file preparation and analysis.